2015 Panerai Luminor Ceramic Fly-back Chrono PAM 580

The first major watch event of 2015 is appropriate nearby, and guess what happens which means: allow the pre-releases begin! As always, Officine Panerai the new watches to become presented in the 2015 collection. The brand new Panerai PAM 580 comes with an in-house automatic mechanical Panerai caliber (the P.9100) supplying fly-back chronograph timing capacity. It’s located within an absolutely killer searching 44mm black ceramic case having a bead-blasted matte-finish.

2015-Panerai-Luminor-Ceramic-Fly-back-Chrono-PAM-580_1

Within the P.9100 calibre nowhere, center-set seconds hand is perfect for the chronograph, whereas the sub-dial at 9 o’clock offers the normal running seconds, together with the middle-set rhodium-plated minute hand. The push-pieces which control the chronograph functions are situated at 8 o’clock (fly-back, totally reset) and 10 o’clock (start, stop). It’s a column-wheel chronograph with vertical clutch (i.e. features typically observed in greater-finish chronograph movements that offer for softer actuation). The caliber is seen with the case back of the watch.

2015-Panerai-Luminor-Ceramic-Fly-back-Chrono-PAM-580_3

The movement is automatic mechanical, P.9100 calibre, xecuted entirely by Panerai. The watch with hours, minutes, small seconds, date, fly-back chronograph and seconds reset. The case is 44 mm with black ceramic. The black dial with luminous Arabic numerals and hour markers. Date at 3 o’clock, seconds at 9 o’clock, central chronograph seconds and minute hands. Power reserve is 72H. Water-resistance is 10 bar (100 meters).

The ceramic utilized by Panerai for that case is really a synthetic ceramic according to zirconium oxide, which can be five occasions harder than steel but substantially light, in addition to extremely resistant against scratches, corrosive agents and temps. Technologically it’s a very advanced material that is complicated to synthesize.

2015-Panerai-Luminor-Ceramic-Fly-back-Chrono-PAM-580_2

Every element of the case is those molded and undergoes successive stages of working and firing, first in a cold (about 100 °C) after which in a greater temperature (as much as 1500 °C), for around three days. The operation is come to the conclusion using the ultimate bead raging which provides it a level, matte finish.

This watch will formally be revealed in Geneva in The month of January 2015 in the Salon Internationale de la Haute Horlogerie (or “SIHH” because it is more generally known to). Panerai isn’t the only brand which will lift the veil on a minumum of one from the pieces from the 2015 collection. It is the new watches that will launch in 2015, if you were the Panerai super fans do not miss it.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *