Hands-On Breguet Tradition Chronograph Independent 7077 Counter Being Limited To 20-Minutes
Swiss Breguet lately showed a remarkably awesome new chronograph which will likely attract chronograph enthusiasts, in addition to individuals individuals who appreciate highly technical watches. The Tradition Chronograph Independent 7077 was introduced at Baselworld recently and signifies a combination of modern and historic horologymodern chronograph using two separate gear trains to enhance the timekeeping, particularly once the chronograph has been used.
Each gear train has its own balance wheel, spring and escapement. And each is visible on the dial side of the watch that we love. The chronograph balance assembly is on the lower left and the timekeeping balance is on the lower right. Notably, the chronograph regulator beats at 5Hz and the timekeeping regulator beats at 3Hz.
Why is the frequency for the chronograph higher than the movement? Breguet has found that in the context of chronographs, higher frequencies (such as 5Hz) improve the stability of rate, since any disturbances are corrected more quickly.
Moreover, 5Hz gives the ability to record elapsed chronograph times more precisely; 1/10th of a second in this instance, just like a Zenith El Primero. (Editor’s note: 18,000 vph/2.5Hz = 1/5th of a second or 5 jumps per second; 21,600 vph/3 Hz = 1/6 second or six jumps per second; 28,800 vph/4 Hz = 1/8 second or eight jumps per second; 36,000 vph/5Hz = 1/10 second or ten jumps per second.)
What is the advantage of two separate gear trains? Disconnecting the chronograph gear train from the movement gear train allows the chronograph to run without affecting the rate of the movement.
Normally, adding a second gear train requires a second mainspring barrel to power it. An extra barrel, of course, takes up more space. Not to mention, the wearer must wind up both the the chronograph barrel spring as well as the going barrel, just like on the Jaeger-LeCoultre Duometere.
Instead, Breguet took a slightly different approach and developed a new type of spring that generates the energy required to drive the chronograph from the user simply operating the reset-to-zero function, eliminating the need for a second mainspring barrel. Once the reset button (on the left side of the case) is pressed, the special flexed blade spring is flexed, and thereby armed. Historically, this type of spring was good for only 20-minutes, and this is exactly how long the chronograph counter goes for.
According to Breguet, “The application of the blade spring principle by Breguet watch makers has given rise to a number of innovations. A non-concentric going train has been associated with the blade spring so as to even out the torque and achieve constant amplitude and rate of the chronograph. A patent has been filed for the entire spring and train assembly. Instead of following its usual curve, the shape of the train has been calculated to transmit constant force to the chronograph.
In addition, the reference 7077 is fitted with a patented chronograph balance wheel in titanium ensuring perfect symmetry with the movement balance wheel. The use of a heavier material for the balance wheel would have meant making it smaller. The overall appearance would be affected, especially since one of the features of the Tradition collection is to make the main parts of the movement visible on the baseplate. The two balance-wheels are thus the same size, despite their different frequencies, and their position is in tune with aesthetic considerations.”
Interestingly, the titanium chronograph balance wheel is flanked by two brakes. The first, working off a cam, frees the balance wheel when the chronograph is started and then holds it when the chronograph is stopped. This makes it possible for the balance wheel to always be in the ideal position, so it can instantly reach its proper amplitude. This innovative mechanism is protected by patent.
Contrary to the typical configuration on a chronograph – that uses one button for start and stop and one for reset – this watch has one pusher to control the start of the chronograph, and the other pusher controls stop and reset to zero. The chronograph is controlled by two screwed pushers. “Start” is on the right at 4 o’clock and “Stop/Reset” are on the left at 8 o’clock.
The Tradition Chronograph Independent 7077 comes in a 44 mm case, in white gold (Ref. 7077BB/G1/9XV) or rose gold (Ref. 7077BR/G1/9XV). The caseband is finely fluted and has welded lugs with screwed bars. Water-resistannce is 30 meters.
Prominently displayed at twelve o’clock is the main dial with hours and minutes on a silvered 18K gold background with intricate engine-turned guilloche-work. The chapter ring has a brushed silver finish and printed Roman numeral hour markers, along with blued steel open-tipped Breguet hands. On the left, is a silvered, retrograde display the indicates elapsed minutes from 0-20. On the right, is a retrograde power reserve display indicating up to 50-hours. There is also a chronograph running indicator at 6 o’clock.
In-house made hand-wound caliber 580DR has 62 jewels and a symmetrical inverted in-line level escapement with silicon pallets. Bridges and mainplate are decorated with a dark grey frosted finish. Breguet balance wheels and Breguet silicon springs. Both oscillators are adjusted in six positions. Bridges are decorated with a darkened frosted finish.
Breguet has always done a great job using the Tradition collection generally. Aside for that chronograph counter being restricted to 20-minutes, that is a really small compliant, there’s a great deal to like concerning the reference 7077. It’s certainly a welcome accessory for the Tradition line – using its signature dial side movement, sophisticated chronograph design and standout finishing.